TOFD

Month: September 2021

TOFD
30 September 2021


blogs

NDT – Few Other Methods

 Here are some rarely used  NDT – Few Other Methods 1.   Eddy Current Testing – ET: Eddy-current inspection uses electromagnetic induction to detect flaws in conductive materials. A circular coil carrying current is placed in proximity to the test specimen (electrically conductive). The alternating current in…
0 By AQC-Inspections 
NDT services
24 September 2021


blogs

Non destructive Testing (NDT)- Common Methods

 Non destructive Testing (NDT)- Common Methods are: Visual Inspection – VT Liquid Penetrant Testing – LT Magnetic Particle Testing – MT Radiographic Testing – RT Ultrasonic Testing – UT 1.   Visual Inspection – VT: Visual inspection after welding is very useful in evaluating quality, even if…
0 By AQC-Inspections 
Welding procedure specification
17 September 2021


blogs

Recommendations for Welding

 We would see about Recommendations for Welding of Structural Steel as per AWS D1.1 , 2020 revision Groove Weld: (Clause 4.4.1) Weld Length : shall be the width of the parts joined , perpendicular to the direction of compressive or tensile stress, Weld Size:  Thickness of thinner…
0 By AQC-Inspections 
welding certificate approval
10 September 2021


blogs

STANDARD SPECIFICATIONS FOR WELDING PROCEDURES

 The sole purpose of welding procedures is to describe the details that are to be followed in the welding of specific materials or type of joint. The following is a list of standard specifications for welding procedures that are normally covered in welding procedures…
0 By AQC-Inspections 
Pipe welding-AQC
1 September 2021


blogs

Welding Standards-Positions for Welding Pipe

 Positions for Welding Pipe For welding pipe in shops, power plants, oil refineries, and chemical plants for crude oil, gasoline, and natural gas, the same basic welding positions described previously are used. Flat Butt Weld Pipe Position…
0 By AQC-Inspections