Month: March 2022

31 March 2022


blogs

Weld Test Coupon Preparation

 Bend Test Coupon Preparation First the centerline on the plate shall be marked. Then another line 1.0 inch above the center line  and another line 1 inch below the center line. This is the section that can be used as an alternate coupon in the event…
0 By AQC-Inspections 
NDT testing
24 March 2022


blogs

Non Destructive Testing- Course and NDT course Fee

 Non Destructive Testing has plenty of scope for people interested in Mechanical Industry and also construction sector. This Quality Control Related subjects is thought in almost all major cities all over the world, and the NDT certificates offered by institutes are valuable across the globe. The…
0 By AQC-Inspections 
Welding procedure
18 March 2022


blogs

WELDING TEST COUPON PROCEDURES

 Welding Procedures Follow a clear example of  test coupons welding procedures for a 3G welding certification. In this 3G  welding procedure the notes were taken from the same section of the AWS code that are used for the 3/8 inch limited thickness test procedure.
0 By AQC-Inspections 
Welding standards
11 March 2022


blogs

Weld defects

 Failure investigation often uncovers facts that lead to changes in design, manufacturing, or operating practice, which will eliminate similar failures in the future. Failures of insignificant parts can also lead to advances in knowledge and should be done objectively, as with a large structure. The…
0 By AQC-Inspections