welder qualification

Tag: welding

welder qualification
8 August 2022


blogs

Types of Weld Joints

 Here we are going to see about two types of weld Joints Groove Welds Fillet Welds Dimensions 1.1.  Groove Welds: In the following figures, the perspective drawings of types of weld joints are shown at the left, looking at each joint from the arrow side. The…
0 By AQC-Inspections 
welding procedure
8 July 2022


blogs

WELDING INSPECTION DUTIES

 Welding Inspection duties General Conditions:    Understand shop drawings, erection drawings, referenced codes and standards. Review the manufacturer’s Material Test Report (MTR). Verify all materials properties and that all materials are readily identifiable and traceable to an MTR.    Conduct a complete visual examination…
0 By AQC-Inspections 
visual inspection on welding
23 June 2022


blogs

Training Institute for Welding and NDT

 Equipment’s required for Welding Institute set up. Welding is a process of joining metals or nonmetals such as plastic. There are different types of welding, and few of them are as below. SMAW- Shielded Metal Arc Welding (commonly…
0 By AQC-Inspections 
welding symbols
20 April 2022


blogs

WELDING PROCEDURE FOR JOISTS

 WELDING FOR JOISTS AND FINISHING OF MACHINING RAILS Unless otherwise authorized by the engineer, any welding to the top flange of steel members for supporting floor form joists and finishing machine rails will not be permitted. Welding of hangers and supports to shear studs will…
0 By AQC-Inspections 
welding symbols
28 October 2021


blogs

WELDING SYMBOLS

 Elements of  Welding Symbols: The first concepts the Welding Inspector must understand very well, are the welding symbols and how to interpret them on drawings. The reference line of the welding symbol, as shown below, is used to designate the type of weld to be…
0 By AQC-Inspections