QC course for mechanical Engineers
7 October 2022


QC course for Mechanical Engineers

Part time QC course for Mechanical Engineers Quality Control and Quality Assurance Department is a satisfying career field, and is one among the core job. Quality Assurance and Quality Control nowadays had become essential in all industries, particularly in manufacturing and construction industries. It may include…
NDT on shafts
5 September 2022


NDT on Shafts

Non Destructive Testing,NDT on Shafts is considered essential , because the shafts are mostly made as load bearing structures, any defects such as cracks will propagate more during acting of load and eventually will cause failure. The most possible defects in shafts are Cracks and…
1 July 2022


Steel Making Process

Steel Making Process Steel is an alloy of iron usually containing less than 1.5% carbon. Steel can be cast into bars, strips, sheets, nails, spikes, wire, rods or pipes as needed by the intended user. Steel making process  at an integrated steel plant involves three basic…
Non Destructive Testing
3 June 2022


NDT institutes in Coimbatore

NDT Training: AQC- Advanced Quality Centre – NDT Institutes in Coimbatore provide World class trainings, certifications & online courses for Non-Destructive Testing, Welding Inspections, Painting Inspections, welding course in Coimbatore, safety trainings & Industrial testing services. The trainings are provided by engineers experienced in…
welding procedure
27 May 2022


Welding Safety

Welding Safety with Gas Cylinders On an oxyacetylene system there will be three types of valves, the cylinder valve, the regulator valve, and the torch valve. There will always be a set of three valves for each system, since  the gas in the cylinders is…
Welding procedure specification
18 May 2022


Safety and Precautions during welding

As in any welding process, safety precautions are very important. All information relating to the safe operation of the welding equipment and process must be fully understood before beginning work. A careless welder who does not observe some simple rules can cause a dangerous situation…
Standards on piping inspection
7 May 2022


Pipe Line Isometric Drawings and P & ID Drawings

Pipe Isometrics : Are drawings which shows details of Process pipe lines in a single line presentation , with details of pipes, pipe connections ( valves, flanges, nipples, reducers, end cap, elbow, etc), along with the dimensions and direction of  pipe line. Example of a…
Welder Qualification
3 May 2022


Weld crack

Weld crack   1.1. Cracking: If a weld crack is found, it must be removed and magnetic-particle inspection performed to ensure every point has been removed before re-welding. Weld Crack can occur on top of a weld…
welding institute
23 April 2022


Dissimilar metal in TIG Welding process

Why use this TIG welding process: TIG Tungsten Inert Gas otherwise called as GTAW- Gas Tungsten Arc Welding , Involves melting the metal using the arc created by tungsten electrode, The welding can be done with or without filler metal, Argon Gas is used as shielding around…
NDT testing
9 April 2022


NDT Methods Selection

NDT Method Selection: The NDT (nondestructive testing) methods are:   Visual Inspection – VT Liquid Penetrant Testing – LT Magnetic Particle Testing – MT Radiographic Testing – RT Ultrasonic Testing – UT Eddy Current Testing – ET (not used in field inspection) Acoustic Emission Testing –…