Welding procedure-AQC
18 September 2020


blogs

Welding Inspections- All you need to know about Metals

Welding is a process of joining similar metals, i.e. Metals with same base content and similar properties or melting point.There are different types of welding methods based on the process of welding. Generally it involves heating of the metal and fusing them, with or…
15 September 2020


blogs

What is the Scope of NDT Certification

Scope of NDT Certification The below instructions answers the questions What is NDT ? What is NDT and what is it used for ? Why is NDT Necessary ? When is NDT Necessary ? IS NDT Certifications use Full ? What are certifications in NDT…
12 September 2020


blogs

What is a Heat Treatment process?

  Heat Treatment of metals is the process in which a metal is heated beyond its critical temperature and cooled in a controlled environment to make desirable changes in its internal micro structural properties and chemical properties to obtain a desired structure.
Gas welding procedure
11 September 2020


blogs

Welding with filler wire procedure

Welding is a process of joining two base metals by heating it. It can be done with or without additional filler metal being used. Below are the few types of welding process : 1)Shield Metal Arc Welding, 2) Metal Inert Gas Welding 3) Tungsten Inert Gas Welding 4) Oxygen…
6 August 2020


blogs

Inspection test plan – QA QC Course for Mechanical Engineers

QA QC : Quality Control or Quality Assurance is most prioritized department in all industries ranging from Steel Plants to research and development projects. Quality Assurance is the act of streaming the manufacturing process in align with quality requirements Quality Control is the act of checking the…
Radiography Testing
3 August 2020


blogs

How is Radiography testing used for finding defects?

Here we would see How is Radiography testing used for finding defects?For Example look at the RT film here Find the Defect inside the Casting? Answer: Shrinkage – Sponge Shrinkage Shrinkage are volumetric defects caused during solidification…
Magnetic particle inspection
31 July 2020


blogs

Magnetic Particle Testing (MPI) Method for Castings

Magnetic Particle Inspection MPI or Magnetic Particle Testing MT is the method for finding Linear Defects  in Ferro Magnetic Materials by utilization of Magnetic Field. Only ferromagnetic materials can be inspected using MPI test. The…
Ultrasonic Testing services
30 July 2020


blogs

Ultrasonic Testing Services

Ultrasonic Testing on Solid Shafts Piping – piping is more often identified in solid shafts, and the location will be at middle of the circular shafts . In most cases the defects extends throughout the shaft….
Mechanical Testing
21 July 2020


blogs

What is Mechanical Testing or Material Testing?

What is Mechanical Testing or Material Testing? Mechanical testing involves finding strength of the material or quality of material by application of load mechanically. There are different mechanical testing for materials. They are Tensile test, Bend Test, Impact Test, Macro Etch Test, Micro Analysis, Inter…
Radiography Testing equipments
16 July 2020


blogs

How is Radiography Testing Done?

Radiography Testing or X ray Testing: Radiography Testing uses electromagnetic radiation from a source to capture image of the object. The source used may be gamma radiation emitting source or an X ray emitting source. Either of the radiation have capability of penetrating into matter…