blogs
blogs
blogs
Safety and Precautions during welding
As in any welding process, safety precautions are very important. All information relating to the safe operation of the welding equipment and process must be fully understood before beginning work. A careless welder who does not observe some simple rules can cause a dangerous situation…
blogs
Weld crack
Weld crack 1.1. Cracking: If a weld crack is found, it must be removed and magnetic-particle inspection performed to ensure every point has been removed before re-welding. Weld Crack can occur on top of a weld…
blogs
Dissimilar metal in TIG Welding process
Why use this TIG welding process: TIG Tungsten Inert Gas otherwise called as GTAW- Gas Tungsten Arc Welding , Involves melting the metal using the arc created by tungsten electrode, The welding can be done with or without filler metal, Argon Gas is used as shielding around…
blogs
Weld Test Coupon Preparation
Bend Test Coupon Preparation First the centerline on the plate shall be marked. Then another line 1.0 inch above the center line and another line 1 inch below the center line. This is the section that can be used as an alternate coupon in the event…
blogs
Sensitivity setting for ultrasonic testing as per ISO 17640
Range and Sensitivity Setting for Ultrasonic testing Setting of range and sensitivity shall be carried out prior to each testing in according to this procedure. The temprture difference between the time of range and sensitivity setting and time of test should be within ± 15°C. Checks…
blogs