Ultrasonic Thickness Testing
29 October 2020


What is Ultrasonic Thickness Testing ?

Ultrasonic Testing Ultrasonic Testing utilizes high frequency sound waves which are not audible to human ears. The Ultrasonic sound waves are used for measurements of thickness of any material. General frequency used in ultrasonic thickness measurements probe is 5 Mega Hertz and above. The probe is placed over…
Radiography Testing
20 October 2020

blogs, Job Assistance, Training

Radiography Testing Training and Certification

Radiography is used to test a variety of products such as welds, castings, forgings, and fabrications Because of the penetration and absorption capabilities of X and gamma radiation. Radiographic testing is one of the primary non-destructive test methods in use today. Radiographic testing usually requires…
Ultrsonic testing
16 October 2020


Principle of Ultrasonic Testing

This blog will let you know about the principle of Ultrasonic testing What is Ultrasonic Testing? Ultrasonic Testing Uses high frequency sound energy to conduct examinations & make measurements. It can be used for flaw detection, Dimensional measurements.
part time QC courses
1 October 2020

blogs, Job Assistance, Training

Part Time QC courses

What is Quality control? Quality Control (QC) is a department in industries which carries activities of quality inspection, testing and ensures Quality of the product is up to the required standards. But the quality control engineers have various up gradation for attaining high paid jobs by…
Ultrasonic Testing
28 September 2020


Ultrasonic Testing for materials

What is Ultrasonic Testing? ULTRASONIC TESTING is a method for sending ultrasound into material and analyzing the returning sound waves for defect free components. It use scanning devices called probes. After application of Couplant over the material surface probe is place over the material. The sound travels…
6 August 2020


Inspection test plan – QA QC Course for Mechanical Engineers

QA QC : Quality Control or Quality Assurance is most prioritized department in all industries ranging from Steel Plants to research and development projects. Quality Assurance is the act of streaming the manufacturing process in align with quality requirements Quality Control is the act of checking the…
QA/ QC course
14 July 2020

Job Assistance

Non Destructive Testing – NDT jobs in Canada

Non Destructive Testing has a lot of scope in Canada and European Countries. Here we provide the procedures for getting Canada Visa and get NDT jobs in Canada How to apply for a Canadian PR (Permanent Residency)? Check your Eligibility for Express Entry Express Entry is…
Stud welding
24 June 2020


What is stud welding?

Studs are welded to steel structures for the purpose of anchoring. They are used as anchoring for Concretes, Insulation etc., The studs may be threaded or headed bolts.The stud is inserted into the chuck of the welding…
part time QC courses
22 June 2020


Advanced Ultrasonic Testing Methods

AQC Inspection provides some information on advanced Ultrasonic Testing (UT ) methods here. Conventional Ultrasonics: Conventional Ultrasonic method is generally used in all industries, since it was invented in the year 1940 by Dr.Floyd Firestone an U.S researcher from University of Michigan and named it “Flaw…
17 June 2020


Ultrasonic Testing on tanks/pipeline.

Ultrasonic Testing on tanks/pipeline: Oil and gas pipelines are designed with wall thickness considering the facts of Design pressure + Corrosion allowance +safety factor. Corrosion thickness testing Using UTT: The corrosion allowance is decided by pre-existing data of…