Standards on piping inspection
12 March 2021


blogs

Standards for Piping Design and Inspection

Standards for Piping Design and Inspection: The original ASME B31 Code for Pressure Piping was first introduced in 1935 as the single document for piping design. In 1955, ASME began to separate the code into sections…
Ultrsonic testing
9 March 2021


blogs

ISO Standards for Ultrasonic Testing

Ultrasonic Testing In Ultrasonic Testing we use something called “Ultrasonic Vibrations” we must know two facts about a vibration: A vibration is a back and forth movement. A vibration is energy in motion A depression of a surface from its normal position is called a displacement.
ultra sonic testing services
2 March 2021


blogs

Sensitivity setting for ultrasonic testing as per ISO 17640

Range and Sensitivity Setting  for Ultrasonic testing Setting of range and sensitivity shall be carried out prior to each testing in according to this procedure. The temprture difference between the time of range and sensitivity setting and time of test should be within ± 15°C. Checks…
ndt testing on pressure vessel
20 February 2021


blogs

Pressure Vessel Inspection- Non Destructive Testing In Service

What is pressure vessel? Pressure vessel is closed container which holds liquids or gasses at a pressure greater than the atmospheric pressure. Definition of Pressure vessel as per ASME BPVC section VIII , Div 1, U1. Pressure vessel are containers for containment of pressure, either external…
acoustic emission sensor
10 February 2021


blogs

What is Acoustic emission testing?

ACOUSTIC EMISSION TESTING (AET) Acoustic Emission Test is a type of Non – Destructive Test method generally used for detecting and locating imperfections in mechanically loaded structures or components. Flaw origination and progression in a stressed component can be identified by acoustic emission test method.This…
inspection on pressure vessels
2 February 2021


blogs

Inspection of Pressure vessels

What is pressure vessel? Pressure vessel is closed container which holds liquids or gasses at a pressure greater than the atmospheric pressure. Definition of Pressure vessel as per ASME BPVC section VIII , Div 1, U1, Pressure vessel are containers for containment of pressure, either external or…
normalising
29 January 2021


blogs

Heat Treatment of Alloys

What is an Alloy? Since metals are insoluble in water, alcohol; they are mixed with other metals in molten state which upon cooling solidifies to a solid mixture called an Alloy. This solid state mixture is also referred as a homogeneous liquid mixture. Alloys are formed by…
visual inspection on welding
21 January 2021


blogs

Welding Symbols – An Introduction to Reading Drawings

Welding and Fabrication Welding is a major process which is involved in almost all fabrication industries, from general structures to aerospace fabrication. Importance of Fabrication Drawings The fabrication drawings includes welding symbols, which directs the fabricators. Provides information like What kind of bevel should be prepared for…
Ultrsonic testing
12 January 2021


blogs

Ultrasonic testing Couplants

A study on the couplant effects in contact ultrasonic testing. The primary purpose of a couplant is to provide a suitable sound path between the transducer and the test surface.Ultrasonic Testing couplants usage can be seen here A couplant must effectively wet or totally…
concrete testing hammer
4 January 2021


blogs

Rebound Hammer Test-Non Destructive testing on Concrete

Non destructive testing for concrete Non Destructive Testing is the process of detecting the quality without destructing the material or without changing its actual properties. Rebound Hammer is also called as Schmidt hammer or Swiss Hammer or Concrete hammer test. This NDT method is used to detect…