blogs
blogs
blogs
Ultrasonic testing of Weld Joints
Ultrasonic Testing involves utilization of ultrasonic sound waves to detect defects inside a material. The welded joints have possibilities of defects inside the welds , or sometime near the weld zone. The few of defects that are often found in welds are Porosity, Cracks, Slag Inclusion,…
blogs
Advanced Ultrasonic Testing Methods
AQC Inspection provides some information on advanced Ultrasonic Testing (UT ) methods here. Conventional Ultrasonics: Conventional Ultrasonic method is generally used in all industries, since it was invented in the year 1940 by Dr.Floyd Firestone an U.S researcher from University of Michigan and named it “Flaw…
blogs
Ultrasonic Testing on tanks/pipeline.
Ultrasonic Testing on tanks/pipeline: Oil and gas pipelines are designed with wall thickness considering the facts of Design pressure + Corrosion allowance +safety factor. Corrosion thickness testing Using UTT: The corrosion allowance is decided by pre-existing data of…
blogs
How is Ultrasonic testing used for finding defects?
How is Ultrasonic testing used for finding defects? All you need to know about Ultrasonic Testing from AQC- Best Ndt Training Institute and Ultrasonic Testing Service provider in Coimbatore , TamilNadu, India Ultrasonic Sound is sound propagating in higher frequencies that are not audible to…
blogs
Best NDT Training Institute
How to run a good training institute and become Best NDT Training Institute? NDT is Non destructive Testing.Testing of Materials for detection and locating of defects without destructing the material and also without changing…
blogs
How to qualify a welder?
This blog will let you know how to qualify a welder. Purpose of welder qualification: To certify the ability of the welder to perform a specific welding process based on the qualified Welding Procedure Specification WPS, about qualification of welding procedure as per standard , I…
blogs
Best NDT Company in Coimbatore
Non Destructive Testing is a smart quality control method that is done the components at various stages, on raw materials, after machining and after some period of service. What does this NDT company do? Non Destructing Testing is a little investment which saves a huge…
blogs
Why is X ray or radiography testing RT done in industries?
The metallic or non-metallic components manufactured in industries are possibly having various inherent defects few of which are mentioned below: Casting Defects:– Blow holes, Shrinkage, Porosity, Pipes, Inclusions, Cold shut, Mis-run, Hot tears, segregation. To know more in detail about the causes and types of…
blogs
QA QC course certification
What are the additional Courses required for Engineering Jobs? Do you know the importance QA QC course certification and other such International certifications are important? Lets see here For Placement, it is required for engineering fresher to upgrade himself with an engineering and technician job certification. The…Latest News
Welding Audit Compliance: Your Guide to ISO & AWS Standards
September 18th, 2025
How NDE 4.0 Is Shaping the Future of Ultrasonic Testing
August 26th, 2025
