blogs
blogs
blogs
Standards for Piping Design and Inspection
Standards for Piping Design and Inspection: The original ASME B31 Code for Pressure Piping was first introduced in 1935 as the single document for piping design. In 1955, ASME began to separate the code into sections…
blogs
ISO Standards for Ultrasonic Testing
Ultrasonic Testing In Ultrasonic Testing we use something called “Ultrasonic Vibrations” we must know two facts about a vibration: A vibration is a back and forth movement. A vibration is energy in motion A depression of a surface from its normal position is called a displacement.
blogs
What is Acoustic emission testing?
ACOUSTIC EMISSION TESTING (AET) Acoustic Emission Test is a type of Non – Destructive Test method generally used for detecting and locating imperfections in mechanically loaded structures or components. Flaw origination and progression in a stressed component can be identified by acoustic emission test method.This…
blogs
Heat Treatment of Alloys
What is an Alloy? Since metals are insoluble in water, alcohol; they are mixed with other metals in molten state which upon cooling solidifies to a solid mixture called an Alloy. This solid state mixture is also referred as a homogeneous liquid mixture. Alloys are formed by…
blogs
Ultrasonic testing Couplants
A study on the couplant effects in contact ultrasonic testing. The primary purpose of a couplant is to provide a suitable sound path between the transducer and the test surface.Ultrasonic Testing couplants usage can be seen here A couplant must effectively wet or totally…
blogs
Rebound Hammer Test-Non Destructive testing on Concrete
Non destructive testing for concrete Non Destructive Testing is the process of detecting the quality without destructing the material or without changing its actual properties. Rebound Hammer is also called as Schmidt hammer or Swiss Hammer or Concrete hammer test. This NDT method is used to detect…
blogs
Welding inspection Methods
Welding is a process of joining metals by process of heating. Most of the weld made are manual. It is possible that the weld may have various defect formation due to parameters of welding and poor workmanship. Why is Welding Inspection Methods important? Therefore the weld…
blogs
Procedure for Liquid Penetrant examination
LIQUID PENETRANT EXAMINATION (PT) Pentrant Testing is surface defects detection method, the method can be used on any material ( i.e: Ferrous/ non-ferrous, conductive/ non conductive, metals/ non metals) But PT is limited to materials having porous surface or very rough surface. PT can be carried out…
blogs