blogs
blogs
blogs
Welding Inspections- All you need to know about Metals
Welding is a process of joining similar metals, i.e. Metals with same base content and similar properties or melting point.There are different types of welding methods based on the process of welding. Generally it involves heating of the metal and fusing them, with or…
blogs
What is the Scope of NDT Certification
Scope of NDT Certification The below instructions answers the questions What is NDT ? What is NDT and what is it used for ? Why is NDT Necessary ? When is NDT Necessary ? IS NDT Certifications use Full ? What are certifications in NDT…
blogs
How is Radiography Testing Done?
Radiography Testing or X ray Testing: Radiography Testing uses electromagnetic radiation from a source to capture image of the object. The source used may be gamma radiation emitting source or an X ray emitting source. Either of the radiation have capability of penetrating into matter…
blogs
Ultrasonic testing of Weld Joints
Ultrasonic Testing involves utilization of ultrasonic sound waves to detect defects inside a material. The welded joints have possibilities of defects inside the welds , or sometime near the weld zone. The few of defects that are often found in welds are Porosity, Cracks, Slag Inclusion,…
blogs
How to qualify a welder?
This blog will let you know how to qualify a welder. Purpose of welder qualification: To certify the ability of the welder to perform a specific welding process based on the qualified Welding Procedure Specification WPS, about qualification of welding procedure as per standard , I…
blogs
Best NDT Company in Coimbatore
Non Destructive Testing is a smart quality control method that is done the components at various stages, on raw materials, after machining and after some period of service. What does this NDT company do? Non Destructing Testing is a little investment which saves a huge…
blogs
Welder Qualification Certificate
How to get Welder Certificate ? I will guide you here for attaining yourself or your employer an welder qualification certificate. Welding is an operator skill based process which should be controlled by a proper welding procedure (WPS), The welding process involves liquefying the base…
blogs
Why is X ray or radiography testing RT done in industries?
The metallic or non-metallic components manufactured in industries are possibly having various inherent defects few of which are mentioned below: Casting Defects:– Blow holes, Shrinkage, Porosity, Pipes, Inclusions, Cold shut, Mis-run, Hot tears, segregation. To know more in detail about the causes and types of…
blogs