blogs
blogs
blogs
What is Ultrasonic Thickness Testing ?
Ultrasonic Testing Ultrasonic Testing utilizes high frequency sound waves which are not audible to human ears. The Ultrasonic sound waves are used for measurements of thickness of any material. General frequency used in ultrasonic thickness measurements probe is 5 Mega Hertz and above. The probe is placed over…
blogs
Preheating in Welding Procedure Specification
Preheating in Welding Procedure Specification: Preheating is the act of heating the base metal before starting to weld. It is considered very essential in high thickness materials, Cr-Mo Steels & HSLA High Speed Low Alloy steels, etc… Here we are going to answer the below topics …
blogs, Job Assistance, Training
Radiography Testing Training and Certification
Radiography is used to test a variety of products such as welds, castings, forgings, and fabrications Because of the penetration and absorption capabilities of X and gamma radiation. Radiographic testing is one of the primary non-destructive test methods in use today. Radiographic testing usually requires…
blogs
What is Gamma Radiography Testing ?
What is Gamma Radiography Testing? Gamma rays are produced by a radio isotope. A radioisotope has an unstable nuclei that does not have enough binding energy to hold the nucleus together. The spontaneous breakdown of an atomic nucleus resulting in the release of energy…
blogs
Ultrasonic Testing for materials
What is Ultrasonic Testing? ULTRASONIC TESTING is a method for sending ultrasound into material and analyzing the returning sound waves for defect free components. It use scanning devices called probes. After application of Couplant over the material surface probe is place over the material. The sound travels…
blogs
Welding Inspections- All you need to know about Metals
Welding is a process of joining similar metals, i.e. Metals with same base content and similar properties or melting point.There are different types of welding methods based on the process of welding. Generally it involves heating of the metal and fusing them, with or…
blogs
What is the Scope of NDT Certification
Scope of NDT Certification The below instructions answers the questions What is NDT ? What is NDT and what is it used for ? Why is NDT Necessary ? When is NDT Necessary ? IS NDT Certifications use Full ? What are certifications in NDT…
blogs
How is Radiography Testing Done?
Radiography Testing or X ray Testing: Radiography Testing uses electromagnetic radiation from a source to capture image of the object. The source used may be gamma radiation emitting source or an X ray emitting source. Either of the radiation have capability of penetrating into matter…
blogs
Ultrasonic testing of Weld Joints
Ultrasonic Testing involves utilization of ultrasonic sound waves to detect defects inside a material. The welded joints have possibilities of defects inside the welds , or sometime near the weld zone. The few of defects that are often found in welds are Porosity, Cracks, Slag Inclusion,…Latest News
BEST NDT TRAINING INSTITUTE IN COIMBATORE
April 18th, 2025
DIFFERENT METAL CUTTING METHODS
April 17th, 2025
NDT PROCESS SELECTION
April 10th, 2025