NDT testing

Tag: ndt

NDT testing
9 April 2022


blogs

NDT Methods Selection

 NDT Method Selection: The NDT (nondestructive testing) methods are:   Visual Inspection – VT Liquid Penetrant Testing – LT Magnetic Particle Testing – MT Radiographic Testing – RT Ultrasonic Testing – UT Eddy Current Testing – ET (not used in field inspection) Acoustic Emission Testing –…
0 By AQC-Inspections 
31 March 2022


blogs

Weld Test Coupon Preparation

 Bend Test Coupon Preparation First the centerline on the plate shall be marked. Then another line 1.0 inch above the center line  and another line 1 inch below the center line. This is the section that can be used as an alternate coupon in the event…
0 By AQC-Inspections 
Adhesion test
24 February 2022


blogs

Adhesion Test on Paints by Tape Test

 Painting Inspection, Adhesion Test, QC Training, QC Course X Cut Test (This Document) Cross Cut Tape Test Method A  – X Cut Tape Test An X-Cut is made on the Dry Paint until the bare substrate , a…
0 By AQC-Inspections 
mechanical testing
3 December 2021


blogs

Mechanical Properties

 The mechanical properties of a material are those properties that involve a reaction to an applied load. The mechanical properties of metals determine the range of usefulness of a material and establish the service life that can be expected. Mechanical properties are also used to…
0 By AQC-Inspections 
cast iron
24 May 2021


blogs, Training

Cast Iron and Its Types

 What is a cast iron? Cast iron are ferrous alloys with greater than 2% carbon. They also contain small amounts of other materials such as silicon, sulphur, manganese, & phosphorous. In general it consists alloys of carbon & iron. They are the least expensive of all metals and…
0 By AQC-Inspections