blogs
blogs
blogs
Welding Procedure for Overlay Weld or Cladding
This document covers the procedure to prepare a WPS – Welding Procedure Specification & PQR – Procedure Qualification Record for Overlay weld, Corrosion Resistant Overlay and Wear Resistant Overlay both. The procedure refers international standard ASME BPVC Section IX, ( American Society of Mechanical Engineers,…
blogs
CLASSIFICATION OF WELDING ELECTRODES
Classification of welding electrodes consists of a prefix letter “E” specifying an electrode, a group of two or three digits specifying weld metal strength in ksi in the ‘as-weld’ or stress relieved condition, and a final two digits specifying type of covering, weld position…
blogs
WELDING PROCESSES
The welding processes are not the scope of this manual, specific for welding inspections. However, only for refreshing, the most common arc welding processes used in heavy and medium carbon and alloy steel manufacturing are: SMAW: Shielded Metal Arc Welding – stick welding electrode; GMAW: Gas…
blogs
Fillet Weld Sizes as per AWS D1.1 & AWS D1.2
Fillet Weld Sizes as per AWS D1.1 & AWS D1.2 This blog here answers your questions about: What is the tolerance for Fillet weld sizes as per AWS D1.1 ? What is the weld size tolerance? What is the required fillet weld size for structures…
blogs
Fillet Weld Types
Fillet Weld Types: The single-fillet-welded T-joints are indicated from both the arrow side and the other side. The symbol for a double fillet-welded T-joint is also Note that the assembly of two T-joints welded pieces involves four fillet welds represented by two double-fillet-weld symbols.
blogs
Standards and Specifications for welding
WELDING INSPECTOR KNOWLEDGES: The Welding Inspector must be a high skilled technician or engineer with a good knowledge of general industry manufacture, materials, quality systems, inspection procedures and Standards and Specifications for welding as: Standard organizations as ASTM, SAE, AISI, AWS, ASME and other institutions; …
blogs
WELDING ELECTRODES AND PREHEAT REQUIREMENTS
The procedure requirements for welding electrodes and preheating temperatures are as follows: Welding must be done with the same process (SMAW or FCAW) used for qualification If the operator has qualified on any of the steel permitted (ASTM A36 and A588), that same operator…
blogs
Mechanical Properties
The mechanical properties of a material are those properties that involve a reaction to an applied load. The mechanical properties of metals determine the range of usefulness of a material and establish the service life that can be expected. Mechanical properties are also used to…
blogs