TOFD
30 September 2021


blogs

NDT – Few Other Methods

Here are some rarely used  NDT – Few Other Methods 1.   Eddy Current Testing – ET: Eddy-current inspection uses electromagnetic induction to detect flaws in conductive materials. A circular coil carrying current is placed in proximity to the test specimen (electrically conductive). The alternating current in…
NDT services
24 September 2021


blogs

Non destructive Testing (NDT)- Common Methods

Non destructive Testing (NDT)- Common Methods are: Visual Inspection – VT Liquid Penetrant Testing – LT Magnetic Particle Testing – MT Radiographic Testing – RT Ultrasonic Testing – UT 1.   Visual Inspection – VT: Visual inspection after welding is very useful in evaluating quality, even if…
Welding procedure specification
17 September 2021


blogs

Recommendations for Welding

We would see about Recommendations for Welding of Structural Steel as per AWS D1.1 , 2020 revision Groove Weld: (Clause 4.4.1) Weld Length : shall be the width of the parts joined , perpendicular to the direction of compressive or tensile stress, Weld Size:  Thickness of thinner…
Pipe welding-AQC
1 September 2021


blogs

Welding Standards-Positions for Welding Pipe

Positions for Welding Pipe For welding pipe in shops, power plants, oil refineries, and chemical plants for crude oil, gasoline, and natural gas, the same basic welding positions described previously are used. Flat Butt Weld Pipe Position…
Radiography Testing equipments
8 July 2021


blogs

Equipments and materials for NDT lab set up

Equipments and materials for NDT lab set up Radiography Testing: 1) X-Ray tube head -450 kV capacity ( only if construction of a exposure room with approval from government is possible) 2) RT Films (D4 ) 3) lead screen 0.125mm, 0.25 mm 4) Film casettes 5) set of IQI -wire…
Acceptance Criteria for Liquid Penetrant Testing -LPT
30 June 2021


blogs, Training

Acceptance Criteria for Liquid Penetrant Testing -LPT

Acceptance Criteria for Liquid Penetrant Testing -LPT as per ASME , AWS and API standards Liquid penetrant testing simply called as PT. Sometimes Dye Penetrant Testing is a surface defect detection NDT  method and is more sensitive to all kind of surface defects, such as…
UT Inspection services
30 March 2021


blogs

Non Relevant Ultrasonic Indications

Non relevant Ultrasonic Indications can usually be identified as one of the following: Electrical Interference Interference form the transducer (search unit) Interference form the surface of the specimen Interference caused by mode conversion of the sound beam Interference caused by the shape of the…
Standards on piping inspection
12 March 2021


blogs

Standards for Piping Design and Inspection

Standards for Piping Design and Inspection: The original ASME B31 Code for Pressure Piping was first introduced in 1935 as the single document for piping design. In 1955, ASME began to separate the code into sections…
Ultrsonic testing
9 March 2021


blogs

ISO Standards for Ultrasonic Testing

Ultrasonic Testing In Ultrasonic Testing we use something called “Ultrasonic Vibrations” we must know two facts about a vibration: A vibration is a back and forth movement. A vibration is energy in motion A depression of a surface from its normal position is called a displacement.
ndt testing on pressure vessel
20 February 2021


blogs

Pressure Vessel Inspection- Non Destructive Testing In Service

What is pressure vessel? Pressure vessel is closed container which holds liquids or gasses at a pressure greater than the atmospheric pressure. Definition of Pressure vessel as per ASME BPVC section VIII , Div 1, U1. Pressure vessel are containers for containment of pressure, either external…