blogs
blogs
blogs
Discontinuities in Ultrasonic Testing in NDT
This blog will discuss types of discontinuities that can be evaluated with the ultrasonic testing in NDT method. Discontinuities can be divided into three general categories inherent, processing and service Inherent discontinuities are usually formed when the metal is molten. Inherent wrought discontinuities relate to the…
blogs
ThermographyTesting – NonDestructive Testing Method
ThermographyTesting – NonDestructive Testing Method that involves visualization of heat radiations from an object and the method is a non contact inspection technique, . It is also simply called as IR – Infrared Thermography, Thermal Imaging technique or Thermography.
blogs
Penetrant testing principle and advantages
Penetrant Testing is one of the effective method for detecting surface flaws,. It can be used on Metals, non-metals, plastics, ceramics & Glass. Not suitable for Porous materials such as wood, bricks, concrete, & other non graded castings, sponge Qualification of Examination Personel Able to read a…
blogs
What is Non Destructive Testing ?
Non Destructive Testing , NDT , is industrial method for analyzing the characteristics of material or finding the discontinuities in the material & Weld joints, without damaging the material. NDT is otherwise called as, Non Destructive Evaluation –NDE, Non Destructive Inspection (NDI) and it a…
blogs
Difference between Destructive and Non Destructive testing
Get the Difference between Destructive and Non Destructive testing here: Non Destructive Testing (NDT): NDT is industrial method for analyzing the characteristics of material or finding the discontinuities in the material & Weld joints, without damaging the material. NDT is otherwise called as, Non Destructive Evaluation –NDE….
blogs
What is Ultrasonic Thickness Testing ?
Ultrasonic Testing Ultrasonic Testing utilizes high frequency sound waves which are not audible to human ears. The Ultrasonic sound waves are used for measurements of thickness of any material. General frequency used in ultrasonic thickness measurements probe is 5 Mega Hertz and above. The probe is placed over…
blogs
Preheating in Welding Procedure Specification
Preheating in Welding Procedure Specification: Preheating is the act of heating the base metal before starting to weld. It is considered very essential in high thickness materials, Cr-Mo Steels & HSLA High Speed Low Alloy steels, etc… Here we are going to answer the below topics …
blogs, Job Assistance, Training
Radiography Testing Training and Certification
Radiography is used to test a variety of products such as welds, castings, forgings, and fabrications Because of the penetration and absorption capabilities of X and gamma radiation. Radiographic testing is one of the primary non-destructive test methods in use today. Radiographic testing usually requires…
blogs