NDT testing

NDT Accessories

Non-Destructive Testing (NDT) accessories are essential components that support NDT techniques used to evaluate the integrity and properties of materials or structures without causing damage. NDT is widely used in industries like aerospace, construction, manufacturing, oil and gas, and more. The accessories used in NDT help ensure accuracy, reliability, and safety during testing. Here’s an overview of key NDT accessories:

Ultrsonic Testing Accessories:

  1. Ultrasonic Thickness Gauge with B Scan – Olympus MG
  2. Ultrasonic Testing probes
  • 4 MHz Angle probe 70°, 60°, 45°,
  • 10 Dia Normal probe 2 Mhz, 4 Mhz,
  • 10 Dia TR Probe 2 MHz, 4 MHz,
  • 20 Dia TR Probe 2 Mhz, 4 Mhz,
  • Curved wedge probe TR 4 MHz,
  1. Ultrasonic testing probe calibration block – IIW V2 block
  2. 4 Step Block for thickness calibration
  3. 19 mm SDH Block-MS material for Angle probe weld scan as per ASME BPVC section V , Article 4
  4. 38mm SDH Block -MS material for Angle probe weld scan as per ASME BPVC section V , Article 4
  5. 75mm SDH Block -MS material for Angle probe weld scan as per ASME BPVC section V, Article 4
  6. Set of 10, Φ5mm FBH DAC Block for Normal probe
  7. Calibration block for Piping with, tangential hole/ Axial hole / Circumferential notch/ axial notch as per ASME BPVC Section V, Article 4 .
  8. UT Defective sample Welded Plate 10mm  – 2 no’s
  9. UT Defective sample – Welded plate 25mm – 2 no’s
  10. UT Defective Sample – Raw material Block with lamination and blow hole– 2 no’s
  11. UT Defective Sample Pipe – 8mm thk OD 3” , Length 300mm
  12. UT Defective Sample Pipe – 16mm thick OD: 12” , length 300mm
  13. UT Defective Sample Pipe (Node Joint ) – OD : 10” / 12 “ , thickness 12mm Length 250mm

Visual  Test Specimens & Fit up specimens :

  1. Visual Weld specimens – weld plate 5mm / 6mm thk – 2 no’s
  2. Visual Weld Specimens – Weld Pipe 3 “ Dia 300mm length , thickness 6mm
  3. Pipe Fit up weld spool Assembly 2 meter length , 2” with (pipe, reducer , Tee, elbow concentric, elbow eccentric , flange and supports)
  4. Pipe fit up sample with supports for display , 12’’ Dia 15mm thick
  5. Plate fit up sample for welder qualification Butt joint , with supports and runner plate , 350x300mmx8mm Thk – 1 no.
  6. Weld Gauges – Bridge cam gauge-2 , Tapper Gauge-2, Hi Low Gauge- 2 , Bevel Protractor- 1, Fillet gauges, V Wac Gauge

Magnetic Particle Testing Accessories:

  1. MPI Yoke Y7 model – 2 no’s
  2. Pipe Gauge – 1 no’s
  3. Burmah Castrol (CB) strip -1set
  4. QQI Strip – 1 set
  5. MTU Test block -1 no.
  6. Centrifugal tube for Visible method with stand -1 no.
  7. Dead Weight – 4.5 Kg & 23 Kg each 1 no.
  8. Hall Effect Meter – 1 no.
  9. Gauss meter (range: 15-0-15 )   –  1 no.
  10. UV Lamps
  11. UV Light Intensity Meter
  12. Lux Meter
  13. Magnetic Particle Dry ( red colour ) – 1 Kg
  14. Dry powder puffer – 1 no.s
  15. Magnetic Particle Aerol Spray can Visible – 500ml  – 5 cans
  16. Magnetic Particle Aerol Spray can Fluorescent – 500 ml – 5 cans
  17. Magnetic Particle Water based with wetting agent (black / green colour )- 1 kg
  18. ASTM MPI test block
  19. MPI Defect specimens – plate -1
  20. MPI defect specimens – pipe – 2
  21. MPI defect specimens – castings – 1
  22. White Contrast Aerol spray – 1

Liquid Penetrant Testing Accessories

  1. Penetrant Aerol Spray can Visible – 5 no’s
  2. Penetrant Aerol Spray Cans Fluorescent – 5 no’s
  3. Cleaner – 1 Ltr
  4. Cleaner Aerol spray cans – 5 no’s
  5. Developer Aerol spray cans – 5 no’s
  6. TAM Pannel – 1
  7. Aluminium test block for PT
  8. Infrared thermometer gun
  9. Tray for PT inspection 500 x 500 mm SS grade.
  10. Defect samples for PT (raw material and Weld joints of SS/ Aluminium material – 4 no’s )

Radiography Testing Accessories:

  1. RT Film Viewer for welds
  2. RT Films with defects – 30 no’s
  3. Densitometer – 1 no
  4. IQI ASTM steel Wire Type – Set A and Set B
  5. IQI ASTM Hole Type group 1 – 15, 21 and 35 – each one number
  6. BS EN ISO Wire – 1 set
  7. Cassete 8×8 – 1 set
  8. Lead Screens 1.25mm and 1.15mm – each 1 no.

Conclusion

NDT accessories enhance the effectiveness of various testing methods, helping industries ensure the safety and integrity of materials and structures. Proper selection and use of these accessories can improve the accuracy and reliability of NDT results.

Enrollment Now Open! 📅

Don’t miss out on this incredible opportunity to boost your career. Enroll now in our NDT course at Advanced Quality Centre AQC and open doors to a brighter future.

📞 Contact Us Today! 📞

@ +91 9489342244 , 8668082413 or email us @[email protected]

visit our website https://aqcinspection.com/

Visit our technical and career updates at our Blog site https://advancedqualitycentre.blogspot.com . or

https://ndtcenter.blogspot.com

Subscribe our youtube channel to know more practical explanations https://aqcinspection.com/