Ultrsonic testing
16 October 2020


blogs

Principle of Ultrasonic Testing

This blog will let you know about the principle of Ultrasonic testing What is Ultrasonic Testing? Ultrasonic Testing Uses high frequency sound energy to conduct examinations & make measurements. It can be used for flaw detection, Dimensional measurements.
Welding procedure-AQC
18 September 2020


blogs

Welding Inspections- All you need to know about Metals

Welding is a process of joining similar metals, i.e. Metals with same base content and similar properties or melting point.There are different types of welding methods based on the process of welding. Generally it involves heating of the metal and fusing them, with or…
15 September 2020


blogs

What is the Scope of NDT Certification

Scope of NDT Certification The below instructions answers the questions What is NDT ? What is NDT and what is it used for ? Why is NDT Necessary ? When is NDT Necessary ? IS NDT Certifications use Full ? What are certifications in NDT…
6 August 2020


blogs

Inspection test plan – QA QC Course for Mechanical Engineers

QA QC : Quality Control or Quality Assurance is most prioritized department in all industries ranging from Steel Plants to research and development projects. Quality Assurance is the act of streaming the manufacturing process in align with quality requirements Quality Control is the act of checking the…
Radiography Testing equipments
16 July 2020


blogs

How is Radiography Testing Done?

Radiography Testing or X ray Testing: Radiography Testing uses electromagnetic radiation from a source to capture image of the object. The source used may be gamma radiation emitting source or an X ray emitting source. Either of the radiation have capability of penetrating into matter…
29 June 2020


blogs

Ultrasonic testing of Weld Joints

Ultrasonic Testing involves utilization of ultrasonic sound waves to detect defects inside a material. The welded joints have possibilities of defects inside the welds , or sometime near the weld zone. The few of defects that are often found in welds are Porosity, Cracks, Slag Inclusion,…
visual inspection on welding
24 June 2020


blogs

What is stud welding?

Studs are welded to steel structures for the purpose of anchoring. They are used as anchoring for Concretes, Insulation etc., The studs may be threaded or headed bolts.The stud is inserted into the chuck of the welding…
part time QC courses
22 June 2020


blogs

Advanced Ultrasonic Testing Methods

AQC Inspection provides some information on advanced Ultrasonic Testing (UT ) methods here. Conventional Ultrasonics: Conventional Ultrasonic method is generally used in all industries, since it was invented in the year 1940 by Dr.Floyd Firestone an U.S researcher from University of Michigan and named it “Flaw…
Standards on piping inspection
17 June 2020


blogs

Ultrasonic Testing on tanks/pipeline.

Ultrasonic Testing on tanks/pipeline: Oil and gas pipelines are designed with wall thickness considering the facts of Design pressure + Corrosion allowance +safety factor. Corrosion thickness testing Using UTT: The corrosion allowance is decided by pre-existing data of…
Non Destructive Testing
18 May 2020


blogs

Best NDT Company in Coimbatore

 Non Destructive Testing is a smart quality control method that is done the components at various stages, on raw materials, after machining and after some period of service. What does this NDT company do? Non Destructing Testing is a little investment which saves a huge…