blogs
blogs
blogs
Non destructive Testing (NDT)- Common Methods
Non destructive Testing (NDT)- Common Methods are: Visual Inspection – VT Liquid Penetrant Testing – LT Magnetic Particle Testing – MT Radiographic Testing – RT Ultrasonic Testing – UT 1. Visual Inspection – VT: Visual inspection after welding is very useful in evaluating quality, even if…
blogs
Recommendations for Welding
We would see about Recommendations for Welding of Structural Steel as per AWS D1.1 , 2020 revision Groove Weld: (Clause 4.4.1) Weld Length : shall be the width of the parts joined , perpendicular to the direction of compressive or tensile stress, Weld Size: Thickness of thinner…
blogs
STANDARD SPECIFICATIONS FOR WELDING PROCEDURES
The sole purpose of welding procedures is to describe the details that are to be followed in the welding of specific materials or type of joint. The following is a list of standard specifications for welding procedures that are normally covered in welding procedures…
blogs
Equipments and materials for NDT lab set up
Equipments and materials for NDT lab set up Radiography Testing: 1) X-Ray tube head -450 kV capacity ( only if construction of a exposure room with approval from government is possible) 2) RT Films (D4 ) 3) lead screen 0.125mm, 0.25 mm 4) Film casettes 5) set of IQI -wire…
blogs, Training
Acceptance Criteria for Liquid Penetrant Testing -LPT
Acceptance Criteria for Liquid Penetrant Testing -LPT as per ASME , AWS and API standards Liquid penetrant testing simply called as PT. Sometimes Dye Penetrant Testing is a surface defect detection NDT method and is more sensitive to all kind of surface defects, such as…
blogs, Training
Cast Iron and Its Types
What is a cast iron? Cast iron are ferrous alloys with greater than 2% carbon. They also contain small amounts of other materials such as silicon, sulphur, manganese, & phosphorous. In general it consists alloys of carbon & iron. They are the least expensive of all metals and…
blogs
Standards for Piping Design and Inspection
Standards for Piping Design and Inspection: The original ASME B31 Code for Pressure Piping was first introduced in 1935 as the single document for piping design. In 1955, ASME began to separate the code into sections…
blogs
ISO Standards for Ultrasonic Testing
Ultrasonic Testing In Ultrasonic Testing we use something called “Ultrasonic Vibrations” we must know two facts about a vibration: A vibration is a back and forth movement. A vibration is energy in motion A depression of a surface from its normal position is called a displacement.
blogs